Decal Application Instructions


Decals should be applied only to surfaces with temperatures between 50 to 90 degrees Fahrenheit and should be allowed to cure for 24 hours before getting wet.

 

Step 1: Clean the surface where you will apply the decal with rubbing alcohol and a clean cloth or cotton ball and allow it to dry.

 

Step 2: Beginning in a corner, peel the backing paper off of the transfer tape, make sure not to leave any of your graphic or letters on the backing paper. If the graphic is not coming off easily use the vinyl applicator or old credit card and rub it firmly from the center point to the edges in all directions a few times.

 

Step 3: Place one side of the transfer tape onto the surface, and press it down with a vinyl applicator or old credit card.

 

Step 4: Continue applying the decal in a rolling motion using the vinyl applicator or old credit card to press it down as you go.

 

Step 5: Once the decal is placed, use the vinyl applicator or old credit card and rub it firmly from the center point to the edges in all directions to remove any air bubbles.

 

Step 6: Beginning in a corner, slowly peel away the transfer tape at a 45 degree angle.

 

Enjoy your new decal!

(0) Items
Items 0
Subtotal $0.00
To Top